2011 Wire cutting stripping machine

1.High efficient machine 2.Taiwan step motor and driver 3.Cutting,stripping by automatic. 4.Economy model

Model	YT-802
Size	420X435X275mm
Weight	38kg
Power	230
Voltage	AC220V~ 50Hz
Stripping length	0-30mm(both ends)
Cutting Length	0.2-99999mm
Cutting Tolerances	:±(0.2+0.002xL)mm
Wire Type	PVC,Teflon,fiberglass
Wire Size	0.3-1.0mm2
Processing Capacity	3000-6000pcs/Hour
Air pressure	0.3-0.5Mpa

Main advantage :

1.High efficient machine 2.Taiwan step motor and driver 3.Cutting,stripping by automatic.4.Economy model

Easy operation drawing:

 1.Normal wire (Wire length:55-9999mm) as drawing

The parameters as below :

Program No. 02     Speed 05

Wire length 0100    Quantity produce 0000

Head wire  007      Strip off 004

End wire  005       Strip off 003

Mid stripping 0000    Mid stripping 0000

Mid stripping 0000    Mid stripping 0000

Strip off  0000        Set quantity 1000

Guage 45            Retract blade 05

Notice When you test the machine , if products were no good (Such as damage with wire cord/can’t remove the cover), please amend the number of Guage.

2,Short wire (Wire length:9mm-55mm)

         

Program No.        Speed

Wire length        Quantity produce:

Head wire         Strip off

End wire          Strip off

Mid stripping 0000   Mid stripping 0000

Mid stripping 0000   Mid stripping 0000

Strip off 0000       Set quantity 1000

Guage 0045        Retract blade 0005

Notice:Adjust the pressure one by one , in order to lock the wire between two roller .When you test the machine , if the wires were no good. Amend the number of pressure and  guage one by one .

3,Middle stripping as drawing

The parameter as below

Program No. 0099         Speed 0005

Wire length 0500          Quantity produce 0000

Head wire 0003           Strip off 0004

End wire  0004            Strip off 0005

Mid stripping 0100          Mid stripping 0200

Mid stripping 0300         Mid stripping  0400

Mid Strip off 0005          Set quantity 1000

Guage 0045               Retract blade 0045

Notice  In this case, the pressure should be more higher than normal wire.if not ,the mid stripping will be too small or can’t move out .It depends on the material hardness.

4,Double cover wire as drawing (Delay:88)

      

The parameter as below :(First you should make sure the Number of Delay which you already input“ 88” in it )

Program No. 0001    Alarm quantity 1000

Wire length  0200       Quantity 0000

Program No. 0001     wire length  0200

Speed  0005           Quantity 0000

Head wire 0018        Strip off 0019

End wire 0015         Strip off 0016

Set quantity 1000     Package quantity 0050

Delay 88               Kinfe power 0050

Guage 0068          Retract balde 0012

Head Strip 0005      End strip 0007

2011 Wire cutting stripping machine